Gigabyte GA-MA790XT-UD4P User Manual download pdf (Page 86)

GA-MA790XT-UD4P Motherboard - 86 -

Figure 1

Step 2:

For AMD SB750 SATA controllers:

Then a controller menu similar to Figure 2 below will appear. Select AMD AHCI Compatible RAID

Controller-x86 platform and press <Enter>. On the next screen, press <Enter> to continue the driver

installation. After the driver installation, you can proceed with the Windows XP installation.

Windows Setup

Press F6 if you need to install a third party SCSI or RAID driver.

5-1-4 Installing the SATA RAID/AHCI Driver and Operating System

With the SATA RAID/AHCI driver diskette and correct BIOS settings, you are ready to install Windows

Vista/XP onto your hard drive(s). The followings are examples of Windows XP and Vista installation.

A. Installing Windows XP

Step 1:

Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the

message "Press F6 if you need to install a 3rd party SCSI or RAID driver" (Figure 1). A screen will then

appear asking you to specify additional device. Insert the floppy disk containing the SATA RAID/AHCI

driver and press <S>.

Figure 2

Windows Setup

ENTER=Select F3=Exit

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

AMD AHCI Compatible RAID Controller-x86 platform

AMD AHCI Compatible RAID Controller-x64 platform

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 111 112

No comments

Gigabyte GA-MA790XT-UD4P User Manual Page 86