Gigabyte GA-G41M-ES2L User Manual download pdf (Page 19)

Hardware Installation- 19 -

• When removing the cable connected to a back panel connector, first remove the cable

from your device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side

to prevent an electrical short inside the cable connector.

Activity LED

Connection/

Speed LED

Activity LED:

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

LAN Port

1-6 Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2

keyboard.

Parallel Port

Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also

called a printer port.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub

connection to this port.

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB

keyboard/mouse, USB printer, USB flash drive and etc.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 95 96

No comments

Gigabyte GA-G41M-ES2L User Manual Page 19