Gigabyte GA-H67MA-D2H User Manual download pdf (Page 30)

BIOS Setup - 30 -

2-1 Startup Screen

The following screens may appear when the computer boots.

A. The LOGO Screen (Default)

Function Keys

B. The POST Screen

Function Keys:

<TAB>: POST SCREEN

Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system startup, refer to the

instructions on the Full Screen LOGO Show item on page 44.

<DEL>: BIOS SETUP\Q-FLASH

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: XPRESS RECOVERY2

If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9> key can be used for

subsequent access to Xpress Recovery2 during the POST. For more information, refer to Chapter 4, "Xpress Recovery2."

<F12>: BOOT MENU

 BootMenuallowsyoutosettherstbootdevicewithoutenteringBIOSSetup.InBootMenu,usetheuparrowkey

> or the down arrow key <

>toselecttherstbootdevice,thenpress<Enter>toaccept.ToexitBootMenu,press

<Esc>.ThesystemwilldirectlybootfromthedeviceconguredinBootMenu.

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order will still be

basedonBIOSSetupsettings.YoucanaccessBootMenuagaintochangetherstbootdevicesettingasneeded.

<END>: Q-FLASH

 Pressthe<End>keytoaccesstheQ-FlashutilitydirectlywithouthavingtoenterBIOSSetuprst.

Motherboard Model

BIOS Version

Award Modular BIOS v6.00PG

H67MA-D2H F4j

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

11/16/2010-H67-7A89VG0AC-00

Function Keys

SATA Mode Message:

"SATA is found running at IDE MODE!"

When the motherboard is set to its default values, the monitor will display a message during the POST, telling you the

SATA controller is running at IDE mode. The message that follows asks if you want to change it to AHCI mode and en-

able hot plug functionality for the SATA connectors.

Press <Y> to enable AHCI mode or <N> to continue IDE mode operation and stop showing this message again.

Note: This message will appear again at next boot if you do not respond YES or NO in time.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 103 104

No comments

Gigabyte GA-H67MA-D2H User Manual Page 30