Gigabyte GA-K8VT890-9 User Manual Page 68

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 67
GA-K8VT890-9 Motherboard - 68 -
English
Installing the RAID drivers
To install operating system onto a serial ATA hard disk successfully, you need to install the SATA controller
driver during OS installation. Without the driver, the hard disk may not be recognized during the Windows
setup process. First of all, copy the driver for the SATA controller from the motherboard driver CD-ROM to a
floppy disk. See the instructions below about how to copy the driver in MS-DOS mode
(Note 1)
. Prepare a
startup disk that has CD-ROM support and a blank formatted floppy disk.
Step 1: Insert the prepared startup disk and motherboard driver CD-ROM in your system. Boot from the
startup disk. Once at the A:\> prompt, change to the CD-ROM drive (example: D:\>). At the D:\> prompt, type
the following two commands. Press ENTER after each command (Fig.1):
cd bootdrv
menu
Step 2: When the controller menu (Fig.2) appears, remove the startup disk and insert the blank formatted
disk. Select the controller driver by pressing the corresponding letter from the menu. Your system will then
automatically zip and transfer this driver file to the floppy disk. Press 0 to exit when finished.
Fig.1 Fig. 2
Step 3: After completing the steps, boot from the Windows installation disk to install the RAID drivers.
Press F6 as soon as you see the "Press F6 if you need to install a third party SCSI or RAID driver" message,
then supply serial ATA controller driver by this floppy disk. Follow the on-screen instructions to complete the
installation.
(Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed under
Windows once for that hard drive. After that, the driver will not have to be installed.)
(Note 1) For users without a startup disk.
Use an alternative system and insert the GIGABYTE motherboard drive CD-ROM. From the CD-
ROM drive (example: D:\) double click the MENU.exe file in the BootDrv folder. A command prompt
window will open similar to that in Fig. 2.
(Note2) In the menu list, Intel IAA_RAID is Intel ICH5R chipset.
(Note 2)
Page view 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 79 80

Comments to this Manuals

Askhig 25 Jan 2024 | 19:30:03

Уважаемые члены энергетической сферы, коммунального хозяйства, транспортных компаний и строительной индустрии компаний, а также руководители строительства! Не теряйте шанс обеспечить ваш бизнес качественными и долгосрочными решениями в области электроснабжения. Организация “Элькабель” рекомендует огромный ассортимент премиум кабельно-проводниковой продукции. “Элькабель” – это обещание стабильности и безопасности для ваших проектов. Наш продукт выделяется прочностью, превосходными технически

Ilonawes 19 Mar 2024 | 16:59:43

Здравствуйте! Что, по вашему мнению, помогает разбавить жизненную рутину? Дает возможность отвлечься от ежедневных забот, вырваться из топкой затягивающей обыденности? Что заставляет Вас испытывать яркие эмоции? Возможно любимое хобби, спорт, путешествия, экстремальный вид отдыха. А может Вы получаете незабываемый восторг от экзотической и не тривиальной кухни или просто обожаете готовить, радовать домочадцев шедеврами кулинарии. Но, согласитесь, что нынешний ритм диктует свои условия и