Gigabyte GA-M68MT-S2 (rev. 1.3) User Manual download pdf (Page 29)

- 29 - BIOS Setup

(Note) Supported on Windows 7/Vista operating system only.

Power-On by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following:

Dayof MonthAlarm:Turnonthesystem at a specic time on each day or on aspecicdayina

month.

Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

HPET Support

(Note)

Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.

(Default: Enabled)

HPET Mode

(Note)

 AllowsyoutoselecttheHPETmodeforyourWindows7/Vistaoperatingsystem.Thisitemiscongu-

rable only if the HPET Support is set to Enabled. (Default: 32-bit mode)

Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event. (Default: Disabled)

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Double Click Double click on left button on the PS/2 mouse to turn on the system.

Power On By Keyboard

Allows the system to be turned on by a PS/2 keyboard wake-up event. (Default: Disabled)

Note: you need an ATX power supply providing at least 1A on the +5VSB lead.

Password Set a password with 1~5 characters to turn on the system.

Any KEY Press any key on the keyboard to turn on the system.

Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.

KB Power ON Password

Set the password when Power On by Keyboard is set to Password. Press <Enter> on this item and set

a password with up to 5 characters and then press <Enter> to accept. To turn on the system, enter the

password and press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <En-

ter> again without entering the password to clear the password settings.

AC Back Function

Determines the state of the system after the return of power from an AC power loss.

Soft-Off The system stays off upon the return of the AC power. (Default)

Full-On The system is turned on upon the return of the AC power.

ErP Support

Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:

Disabled)

Note: When this item is set to Enabled, the following four functions will become unavailable:

PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Comments to this Manuals

No comments

Gigabyte GA-M68MT-S2 (rev. 1.3) User Manual Page 29

Comments to this Manuals

Related products and manuals for Motherboards Gigabyte GA-M68MT-S2 (rev. 1.3)