Gigabyte AMD Socket AM2 Processor Motherboard GA-M55S-S3 User Manual download pdf (Page 16)

GA-M55S-S3 (rev. 2.0) Motherboard - 16 -

English

1-5 Installation of Expansion Cards

You can install your expansion card by following the steps outlined below:

1. Read the related expansion card's instruction document before install the expansion card into the

computer.

2. Remove your computer's chassis cover, screws and slot bracket from the computer.

3. Press the expansion card firmly into expansion slot in motherboard.

4. Be sure the metal contacts on the card are indeed seated in the slot.

5. Replace the screw to secure the slot bracket of the expansion card.

6. Replace your computer's chassis cover.

7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.

8. Install related driver from the operating system.

Installing a PCI Express x16 expansion card:

To install a VGA card or to release an

installed card, users can also press the

latch on the back of the drawable bar as

the picture to the left shows.

Please carefully pull out the small white-

drawable bar at the end of the PCI Ex-

press x16 slot when you try to install/

uninstall the VGA card. Please align the

VGA card to the onboard PCI Express

x16 slot and press firmly down on the

slot. Make sure your VGA card is locked

by the small white-drawable bar.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 87 88

No comments

Gigabyte AMD Socket AM2 Processor Motherboard GA-M55S-S3 User Manual Page 16