Gigabyte Network Device GA-7N400 User Manual download pdf (Page 9)

Deleting RAID Sets

1. To remove one or more RAID sets, select “Delete RAID Set.”

2. Select desired set and press Y when asked “Are You Sure?”

Resolving Conflict

When a RAID set is created, the metadata written to the disk includes drive connection information

(Primary Chanel, Secondary Channel). If, after a disk failure, the replacement disk was previously part

of a RAID set (or used in another system), it may have conflicting metadata, specifically in reference to

the drive connection information. If so, this will prohibit the RAID set from being either created or rebuilt,

In order for the RAID set to function properly, this old metadata must be first overwritten with the new

metadata. To resolve this, select “Resolve Conflict” and the correct metadata, including the correct drive

connection information, will be written to the replacement disk.

SATA RAID Function

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

No comments

Gigabyte Network Device GA-7N400 User Manual Page 9