Gigabyte GA-G41M-ES2H User Manual download pdf (Page 42)

BIOS Setup - 42 -

The following elds display your hard drive specications. If you wish to enter the parameters manually,

refer to the information on the hard drive.

Capacity Approximate capacity of the currently installed hard drive.

Cylinder Number of cylinders.

Head Number of heads.

Precomp Write precompensation cylinder.

Landing Zone Landing zone.

Sector Number of sectors.

Drive A

Allows you to select the type of oppy disk drive installed in your system. If you do not install a oppy

disk drive, set this item to None. Options are: None, 360K/5.25", 1.2M/5.25", 720K/3.5", 1.44M/3.5",

2.88M/3.5".

Floppy 3 Mode Support

Allows you to specify whether the installed oppy disk drive is 3-mode oppy disk drive, a Japanese

standard oppy disk drive. Options are: Disabled (default), Drive A.

Halt On

Allows you to determine whether the system will stop for an error during the POST.

All Errors Whenever the BIOS detects a non-fatal error the system boot will stop.

No Errors The system boot will not stop for any error.

All, But Keyboard The system boot will not stop for a keyboard error but stop for all other errors.

(Default)

All, But Diskette The system boot will not stop for a oppy disk drive error but stop for all other

errors.

All, But Disk/Key The system boot will not stop for a keyboard or a oppy disk drive error but it

will stop for all other errors.

Memory

These elds are read-only and are determined by the BIOS POST.

Base Memory Also called conventional memory. Typically, 640 KB will be reserved for the

MS-DOS operating system.

Extended Memory The amount of extended memory.

Total Memory The total amount of memory installed on the system.

1 ... 41 42 43 ... 88

No comments

Gigabyte GA-G41M-ES2H User Manual Page 42