GA-H97M-DS3PUser's ManualRev. 100112ME-H97MS3P-1001R
- 10 -1-6 Back Panel ConnectorsUSB 2.0/1.1 PortThe USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a US
- 11 -To congure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio drive
- 12 -1-7 Internal Connectors1) ATX_12V2) ATX3) CPU_FAN4) SYS_FAN5) SATA3 0/1/2/3/4/56) F_PANEL7) F_AUDIO8) F_USB309) F_USB1/F_USB210) COM11) LPT12)
- 13 -1/2) ATX_12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enoug
- 14 -5) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.
- 15 -8) F_USB30 (USB 3.0/2.0 Header) The header conforms to USB 3.0/2.0 specication and can provide two USB ports. For purchasing the optional 3.5
- 16 -Pin No. Denition Pin No. Denition1 NDCD- 6 NDSR-2 NSIN 7 NRTS-3 NSOUT 8 NCTS-4 NDTR- 9 NRI-5 GND 10 No Pin10) COM (Serial Port Header) The C
- 17 -Chapter 2 BIOS SetupBIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. It
- 18 -2-2 M.I.T.Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations
- 19 -(Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique feature
Copyright© 2014 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademarks mentioned in this manual are legally registered to their respective
- 20 -(Note 1) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique featu
- 21 - ` PC Health Status & Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enable
- 22 - & System Fan Speed Control Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal
- 23 - &System Language Selects the default language used by the BIOS. &System Date Sets the system date. The date format is week (read-only
- 24 - & Bootup NumLock State Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: Enabled) &
- 25 -(Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique feature
- 26 - & Administrator Password Allows you to congure an administrator password. Press <Enter> on this item, type the password, and then p
- 27 - & XHCI Mode Allows you to determine the operating mode for the xHCI controller in OS. Smart Auto This mode is available only when the
- 28 - ` SATAConguration & Integrated SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) & SATA Mode
- 29 -2-6 Power Management & Power Loading Enables or disables dummy load. When the power supply is at low load, a self-protection will activate
- 3 -Table of ContentsGA-H97M-DS3P Motherboard Layout ...4GA-H97M-DS3P Mothe
- 30 - & Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: To use this function, you need an ATX po
- 31 - & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup progr
- 32 -Chapter 3 AppendixBeforeyoubegin,pleasepreparethefollowingitems: • At least two SATA hard drives (to ensure optimal performance, it is r
- 33 -C-2.ConguringLegacyRAIDROMEnter the Intel® legacy RAID BIOS setup utility to congure a RAID array. Skip this step and proceed with the ins
- 34 - • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8.1 as the example operatin
- 35 -Regulatory StatementsRegulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be im
- 36 -FCC Notice (U.S.A. Only)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
- 37 -
- 38 -
- 39 -
- 4 -The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject t
- 40 -Contact UsGIGA-BYTE TECHNOLOGY CO., LTD.Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New Taipei City 231,TaiwanTEL: +886-2-8912-4000, FAX: +
- 5 -GA-H97M-DS3P Motherboard Block DiagramFor detailed product information/limitation(s), refer to "1-2 Product Specications."iTE® Super I
- 6 -Chapter 1 Hardware Installation1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which
- 7 -1-2 ProductSpecicationsCPU Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® pr
- 8 -Internal Connectors 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 6 x SATA 6Gb/s connectors 1 x CPU fan header
- 9 -Unique Features Support for Q-Flash Support for Smart Switch Support for Xpress InstallBundled Software Norton® Internet Security (OEM v
Comments to this Manuals