Gigabyte GA-M68M-S2P User Manual download pdf (Page 72)

Appendix - 72 -

B. Installing Windows Vista

(The procedure below assumes that only one RAID array exists in your system.)

Step 1:

Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps.

When a screen similar to that below appears (RAID hard drive will not be detected at this stage), select Load

Driver (Figure 3).

Step 2:

Insertthemotherboarddriverdisk(MethodA)ortheremovablestoragedevicesuchasUSBashdrivethat

contains the SATA RAID driver (Method B), then specify the location of the driver (Figure 4). Note: For users

usingaSATAopticaldrive,besuretocopythedriverlesfromthemotherboarddriverdisktoaUSBash

drive before installing Windows Vista (go to the BootDrv\UDA\WinVista folder and save the whole sataraid

foldertotheUSBashdrive).ThenuseMethodBtoloadthedriver.

Method A:

Insert the motherboard driver disk into your system and browse to the following directory:

BootDrv\UDA\WinVista\sataraid

For Windows Vista 64-bit, browse to BootDrv\UDA\WinVista64\sataraid.

Method B:

InserttheUSBashdrivecontainingthedriverlesandbrowsetothesataraid folder.

Figure 3

Figure 4

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 95 96

No comments

Gigabyte GA-M68M-S2P User Manual Page 72