Gigabyte GA-P67A-UD3 User Manual Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
- 47 - BIOS Setup
Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.
(Default: Disabled)
Onboard USB 3.0 Controller (Renesas D720200 USB 3.0 Controller, on the Back Panel)
jk
Enables or disables the Renesas D720200 USB 3.0 controller. (Default: Enabled)
USB3.0 Turbo (Renesas D720200 USB 3.0 Controller
, on the Back Panel
)
jk
Enables or disables the Turbo USB mode for the Renesas D720200 USB 3.0 controller. The actual per-
formance may vary depending on the number of devices being installed. (Default: Disabled)
Onboard Serial Port 1
EnablesordisablestherstserialportandspeciesitsbaseI/Oaddressandcorrespondinginterrupt.
Options are:Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.
When a Cable Problem Occurs...
Ifacableproblemoccursonaspeciedpairofwires,theStatuseldwillshowShort and then length
shown will be the approximate distance to the fault or short.
Example:
Part1-2 Status = Short / Length = 2m
Explanation: A fault or short might occur at about 2m on Part 1-2.
Note: Part 4-5 and Part 7-8 are not used in a 10/100 Mbps environment, so their Statuseldswillshow
Open, and the length shown is the approximate length of the attached LAN cable.
j
Only for GA-P67A-UD3
k
Only for GA-PH67A-UD3
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 103 104

Comments to this Manuals

No comments