Gigabyte GA-K8N51PVMT-9-RH User Manual download pdf (Page 16)

GA-K8N51PVMT-9-RH Motherboard - 16 -

English

1-5 Installation of Expansion Cards

You can install your expansion card by following the steps outlined below:

1. Read the related expansion card's instruction document before install the expansion card into the

computer.

2. Remove your computer's chassis cover, screws and slot bracket from the computer.

3. Press the expansion card firmly into expansion slot in motherboard.

4. Be sure the metal contacts on the card are indeed seated in the slot.

5. Replace the screw to secure the slot bracket of the expansion card.

6. Replace your computer's chassis cover.

7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.

8. Install related driver from the operating system.

Installing a PCI Express x 16 expansion card:

To release an installed card, users can

also press the latch on the opposite side

of the drawable bar as the picture to the

left shows.

Please carefully pull out the small white-

drawable bar at the end of the PCI Ex-

press x 16 slot when you try to install/

uninstall the VGA card. Please align the

VGA card to the onboard PCI Express x

16 slot and press firmly down on the slot.

Make sure your VGA card is locked by

the small white-drawable bar.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 87 88

No comments

Gigabyte GA-K8N51PVMT-9-RH User Manual Page 16