Gigabyte GV-N98TOC-1GI (REV. 2.0) User Manual download pdf (Page 9)

- 9 - Hardware Installation

2.2. Hardware Installation

Now that you have prepared your computer, you are ready to install your graphics card.

Step 3.

Plug the display cable into your card; then turn on the computer

and monitor. To connect a D-Sub monitor to your graphics card,

use the D-Sub connector. To connect a flat panel display to your

graphics card, use the DVI-I connector. To connect an HDMI

monitor to your graphics card,use the HDMI connector.

Connect a D-Sub monitor

Connect an HDMI monitor

To Flat Panel DisplayTo D-Sub MonitorTo HDMI Monitor

Step 1.

Locate the PCI Express x16 slot. If necessary, remove the

metal cover from this slot; then align your graphics card with

the PCI Express x16 slot, and press it in firmly until the card is

fully seated.

Step 2.

Replace the screw to fasten the card in place, and replace the

computer cover.

Make sure that the gold edge connector of the graphics card is securely

inserted.

After installation, remember to connect the power cable to your graphics

card, or the system will not boot. Do not touch the card when it's operating

to prevent system instability.

Connect a flat panel display

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Gigabyte GV-N98TOC-1GI (REV. 2.0) User Manual Page 9