- 29 - BIOS Setup
2-4 StandardCMOSFeatures
Date(mm:dd:yy)
Sets the system date.
Time(hh:mm:ss)
Sets the system time.
IDEChannel0,1Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Congure your SATA devices by using one of the two methods below:
•Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
•None If no SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDEChannel2,3Master
IDE Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
Extended IDE Drive
Congure your SATA devices by using one of the two methods below:
•Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
•None If no SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
Capacity Approximate capacity of the currently installed hard drive.
HaltOn
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
Memory
These elds are read-only and are determined by the BIOS POST.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Standard CMOS Features
Date (mm:dd:yy) Thu, Jun 9 2011
Time (hh:mm:ss) 22:31:24
IDEChannel0Master [None]
IDEChannel0Slave [None]
IDEChannel1Master [None]
IDEChannel1Slave [None]
IDEChannel2Master [None]
IDEChannel3Master [None]
HaltOn [All,ButKeyboard]
BaseMemory 640K
Extended Memory 1022M
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
Comments to this Manuals