Gigabyte GA-P67A-UD3 User Manual download pdf (Page 80)

Appendix - 80 -

Step 3:

After entering the CREATE VOLUME MENU screen, enter a volume name with 1~16 letters (letters cannot

be special characters) under the Name item and press <Enter>. Then, select a RAID level (Figure 4). RAID

levels supported include RAID 0, RAID 1, Recovery, RAID 10, and RAID 5 (the selections available depend

on the number of the hard drives being installed). Press <Enter> to proceed.

Step 4:

Under Disks item, select the hard drives to be included in the RAID array. If only two hard drives are installed,

they will be automatically assigned to the array. Set the stripe block size (Figure 5) if necessary. The stripe

block size can be set from 4 KB to 128 KB. Once you have selected the stripe block size, press <Enter>.

Figure 4

Figure 5

Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1046

RAID0: Stripes data (performance).

[

]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

[ HELP ]

Name : Volume0

RAID Level : RAID0(Stripe)

Disks : Select Disks

Strip Size : 128KB

Capacity : 111.7 GB

Sync : N/A

Create Volume

[ CREATE VOLUME MENU ]

Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1046

The following are typical values:

RAID0 - 128KB

RAID10 - 64KB

RAID5 - 64KB

[