Gigabyte GA-X99-UD3 User Manual download pdf (Page 76)

Conguring SATA Hard Drive(s)

- 76 -

B. Rebuilding an Array

Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only

to fault-tolerant arrays such as RAID 1, RAID 5 or RAID 10 arrays. The procedures below assume a new drive

isaddedtoreplaceafaileddrivetorebuildaRAID1array.(Note:Thenewdrivemusthaveequalorgreater

capacitythantheoldone.)

Turn off your computer and replace the failed hard drive with a new one. Restart your computer.

• Enabling Automatic Rebuild

Step 1:

Whenthemessage"Press<Ctrl-I>toenterCongurationUtility"appears,press<Ctrl>+<I>toentertheRAID

CongurationUtility.ThefollowingscreenappearsafteryouentertheRAIDCongurationUtility.

Step 2:

Select the new hard drive to add into the array to be rebuilt and press <Enter>. The following screen appears,

indicating that an automatic rebuild will be performed after you enter the operating system. If you do not enable

automaticrebuildonthisstage,youhavetomanuallyrebuildthearrayintheoperatingsystem(seethenext

pageformoredetails).

Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126

3. Reset Disks to Non-RAID

4. Exit

RAID Volumes :

None dened.

Physical Disks :

ID Drive Model Serial # Size Type/Status(Vol ID)

0 Hitachi HDS72105 JP1532FR3BWV7K 465.7GB Member Disk (0)

1 Hitachi HDS72105 JP1532FR3ABMPK 465.7GB Non-RAID Disk

[

]-Select [ESC]-Exit [ENTER]-Select Menu

[ DISK/VOLUME INFORMATION ]

[ MAIN MENU ]

1. Create RAID Volume

2. Delete RAID Volume

[ DEGRADED VOLUME DETECTED ]

[

]-Previous/Next [ENTER]-Select [ESC]-Exit

"Degraded volume and disk available for rebuilding detected. Selecting

a disk initiates a rebuild. Rebuild completes in the operating system.

Select the port of the destination disk for rebuilding (ESC to exit):

ID Drive Model Serial # Size

1 Hitachi HDS721050CLA JP1532FR3ABMPK 465.7GB

Intel(R) Rapid Storage Technology - Option ROM - 13.1.0.2126

RAID Volumes :

ID Name Level Strip Size Status Bootable

0 Volume0 RAID1(Mirror) N/A 465.7GB Rebuild Yes

Physical Devices :

ID Devices Model Serial # Size Type/Status(Vol ID)

0 Hitachi HDS72105 JP1532FR3BWV7K 465.7GB Member Disk (0)

1 Hitachi HDS72105 JP1532FR3ABMPK 465.7GB Member Disk (0)

[

]-Select [ESC]-Exit [ENTER]-Select Menu

[ DISK/VOLUME INFORMATION ]

Volumes with "Rebuild" status will be rebuilt within the operating system.

[ MAIN MENU ]

4. Recovery Volume Options

5. Acceleration Options

6. Exit

1. Create RAID Volume

2. Delete RAID Volume

3. Reset Disks to Non-RAID

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 87 88

Comments to this Manuals

No comments

Gigabyte GA-X99-UD3 User Manual Page 76

Comments to this Manuals

Related products and manuals for Motherboards Gigabyte GA-X99-UD3