Gigabyte GA-K8N51PVMT-9-RH User Manual download pdf (Page 22)

GA-K8N51PVMT-9-RH Motherboard - 22 -

English

6) IDE1 / IDE2 (IDE Connector)

An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one

IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If

you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other

as Slave (for information on settings, please refer to the instructions located on the IDE device).

Pin No. Definition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

7) SATAII0/1/2/3 (SATA 3Gb/s Connectors, Controlled by nForce 430)

SATA 3Gb/s can provide up to 300MB/s transfer rate. Please refer to the BIOS setting for the SATA

3Gb/s and install the proper driver in order to work properly.

IDE2 IDE1

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

No comments

Gigabyte GA-K8N51PVMT-9-RH User Manual Page 22