Gigabyte GA-K8N51PVMT-9-RH User Manual download pdf (Page 67)

Appendix- 67 -

English

Step 2:

If you do not create RAID, select Hard Disk Boot Priority under the Advanced BIOS Features

menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which

you wish to install Microsoft Windows 2000/XP. You should see a screen similar to Figure 3 below.

Figure 3

After configuring the SATA controller mode in system BIOS, if you wish to create RAID, save the settings

and exit. Then go to RAID BIOS (refer to page 6) to configure the RAID array. After finished, re-enter the

system BIOS Setup to set hard disk boot priority before OS installation. Select Hard Disk Boot Priority

under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the

RAID array onto which you wish to install Microsoft Windows 2000/XP (Figure 4).

Figure 4

Hard Disk Boot Priority

1. CH2 M. : ST3120026AS

2. CH3 M. : ST3120026AS

3. Bootable Add-in Cards

: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

Item Help

Menu Level 

Use <> or <> to

select a device, then

press <+> to move it

up, or <-> to move it

down the list. Press

<ESC> to exit this

menu.

Hard Disk Boot Priority

1. SCSI-0: NVIDIA MIRROR 111.7

2. Bootable Add-in Cards