Gigabyte GA-K8N51PVMT-9-RH User Manual download pdf (Page 70)

GA-K8N51PVMT-9-RH Motherboard - 70 -

English

Step 6:

Press F7 after selecting the target hard disks. A message which says "Clear disk data?" will appear

(Figure 9). If you are sure to clear the data in the selected hard drives, press Y. (If the hard drives

contain previously created RAID array, you need to press Y to clear the data from the hard drives.)

Figure 9

Figure 8

Step 5:

Next, select the hard drives which you wish to be included in the disk array. The Free Disks section

displays the information about the currently installed SATA hard drives. Press the TAB key to move to

the Free Disks section. Select the target hard drives using the UP or DOWN ARROW key and use the

RIGHT ARROW key to add the hard drives to the Array Disks section (Figure 8).

Clear disk data ?

[Y] YES [N] NO

MediaShield RAID Utility July 27 2005

- Define a New Array -

RAID Mode: Striping Striping Block: Optimal

[



] Add

[



] Del

[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [



] Select [ENTER] Popup

2.0.M ST3120026AS 111.79GB

2.1.M ST3120026AS 111.79GB

Free Disks

Loc Disk Model Capacity

Array Disks

Loc Disk Model Capacity

RAID Mode: Striping Striping Block: Optimal

[



] Add

[



] Del

[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [



] Select [ENTER] Popup

1.0.M ST3120026AS 111.79GB

1.1.M ST3120026AS 111.79GB

MediaShield RAID Utility July 27 2005

- Define a New Array -

Array Disks

Loc Disk Model Capacity

Free Disks

Loc Disk Model Capacity

Clear disk data ?

[Y] YES [N] NO

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 87 88

Comments to this Manuals

No comments

Gigabyte GA-K8N51PVMT-9-RH User Manual Page 70

Comments to this Manuals

Related products and manuals for Server/workstation motherboards Gigabyte GA-K8N51PVMT-9-RH