Gigabyte GA-K8N51PVMT-9-RH User Manual download pdf (Page 75)

Appendix- 75 -

English

Figure 20

Step 4:

When the next screen (Figure 19) appears, press ENTER to continue the SATA driver installation from

the floppy disk.

Figure 19

After the SATA controller driver installation is completed, you should see a screen similar to that below.

You can proceed with the Windows 2000/XP installation now.

Windows Setup

S=Specify Additional Device ENTER=Continue F3=Exit

Setup will load support for the following mass storage device(s):

NVIDIA RAID CLASS DRIVER (required)

NVIDIA NForce Storage Controller (required)

* To specify additional SCSI adapters, CD-ROM drives, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

WindowsXP Professional Setup

Enter= Continue R=Repair F3=Exit

Welcome to Setup.

This port of the Setup program prepares Microsoft(R)

Windows (R) XP to run on your computer.

To set up Windows XP now, press ENTER.

To repair a Windows XP installation using

Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 87 88

No comments

Gigabyte GA-K8N51PVMT-9-RH User Manual Page 75