Gigabyte GA-M68M-S2P User Manual download pdf (Page 24)

Hardware Installation - 24 -

6) IDE (IDE Connector)

The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attach-

ing the IDE cable, locate the foolproof groove on the connector. If you wish to connect two IDE devices,

remember to set the jumpers and the cabling according to the role of the IDE devices (for example,

masterorslave).(Forinformationaboutconguringmaster/slavesettingsfortheIDEdevices,readthe

instructions from the device manufacturers.)

7) SATA2_0/1/2/3 (SATA 3Gb/s Connectors)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.

Each SATA connector supports a single SATA device. The NVIDIA

GeForce 7025/nForce 630a control-

lersupportsRAID0,RAID1,RAID10,RAID5,andJBOD.RefertoChapter5,"ConguringSATAHard

Drive(s),"forinstructionsonconguringaRAIDarray.

PinNo. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

• A RAID 0 or RAID 1 congurationrequiresatleasttwohard drives. If more than two hard

drives are to be used, the total number of hard drives must be an even number.

• ARAID5congurationrequiresatleastthreeharddrives.(The totalnumber ofharddrives

does not have to be an even number.)

• ARAID10congurationrequiresatleastfourharddrivesandthetotalnumberofharddrives

must be an even number.

DEBUG

PORT

G.QBOFM

SATA2_3

SATA2_2

DEBUG

PORT

G.QBOFM

SATA2_1

DEBUG

PORT

G.QBOFM

SATA2_0

DEBUG

PORT

G.QBOFM

Please connect the L-shaped end of

the SATA cable to your SATA hard

drive.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 95 96

Comments to this Manuals

No comments

Gigabyte GA-M68M-S2P User Manual Page 24

Comments to this Manuals

Related products and manuals for Motherboards Gigabyte GA-M68M-S2P