Gigabyte GA-E2100N User Manual

GA-E2100NUser's ManualRev. 100112ME-E2100N-1001R

- 10 -Activity LEDConnection/Speed LEDLAN PortActivity LED:Connection/Speed LED:State DescriptionOrange 1 Gbps data rateGreen 100 Mbps data rateOff 1

- 11 -1-5 Internal ConnectorsRead the following guidelines before connecting external devices: • First make sure your devices are compliant with the

- 12 -1/2) ATX_12V/ATX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enoug

- 13 -5) SATA3 0/1 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s st

- 14 -8) F_AUDIO(FrontPanelAudioHeader) The front panel audio header supports Intel High Denition audio (HD) and AC'97 audio. You may conn

- 15 -11) CLR_CMOS(ClearCMOSJumper) Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. To clear the CM

- 16 -Chapter2 BIOSSetup • Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is rec

- 17 -2-2 M.I.T.Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations

- 18 - & SVM Mode Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems and applications

- 19 - ` PC Health Status & ResetCaseOpenStatus Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled

MotherboardGA-E2100NJan. 13, 2014Jan. 13, 2014MotherboardGA-E2100NCopyright© 2014 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademarks me

- 20 -2-3 System InformationThis section provides information on your motherboard model and BIOS version. You can also select the default language us

- 21 -2-4 BIOSFeatures & BootOptionPriorities Species the overall boot order from the available devices. For example, you can set hard drive

- 22 - & Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed. (Default: Disabled

- 23 - & OtherPCIDeviceROMPriority Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other t

- 24 - & HDAudioAzaliaDevice Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in aud

- 25 - & PORT0HotPlug~PORT1HotPlug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) & SATAPoweronPOR

- 26 - & HPET Timer Enables or disables High Precision Event Timer (HPET) for Windows 8/7/Vista operating system. (Default: Enabled) & Soft-O

- 27 -2-7 Save & Exit & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits

- 28 -Chapter 3 Appendix • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the ex

- 29 -Regulatory StatementsRegulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be im

- 3 -Table of ContentsGA-E2100N Motherboard Layout ...4GA-E2100N Moth

- 30 -FCCNotice(U.S.A.Only)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

- 31 -

- 32 -Contact UsGIGA-BYTETECHNOLOGYCO.,LTD.Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New Taipei City 231,TaiwanTEL: +886-2-8912-4000, FAX: +

- 4 -GA-E2100N Motherboard LayoutThe box contents above are for reference only and the actual items shall depend on the product package you obtain. Th

- 5 -For detailed product information/limitation(s), refer to "1-2 Product Specications."GA-E2100N Motherboard Block DiagramAMD APUAPU CLK+

- 6 -Chapter 1 Hardware Installation1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which

- 7 -1-2 ProductSpecicationsAPU  Built in with an AMD® E1-2100 (1.0 GHz) APU with Radeon™ HD 8210 SoC* Do not disassemble the onboard SoC and t

- 8 -Back Panel Connectors  1 x PS/2 keyboard/mouse port  1 x parallel port  1 x serial port  1 x D-Sub port  1 x HDMI port  2 x USB 3.0/2.0 por

- 9 -1-3 Installing the MemoryRead the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the mem