Gigabyte GA-F2A78M-D3H (rev. 3.0) User Manual download pdf (Page 56)

ConguringSATAHardDrive(s) - 56 -

Step 2:

IfyouwanttocongureUEFIRAID,followthestepsin"C-1."ToenterthelegacyRAIDROM,savethesettings

and exit BIOS Setup. Refer to "C-2" for more information.

The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.

The actual BIOS Setup menu options you will see shall depend on the motherboard you have and

the BIOS version.

B.ConguringSATAcontrollermodeinBIOSSetup

MakesuretoconguretheSATAcontrollermodecorrectlyinsystemBIOSSetup.

Step 1:

Turnonyourcomputerandpress<Delete>toenterBIOSSetupduringthePOST(Power-OnSelf-Test).Make

sure OnChip SATA Channel is enabled. To enable RAID for the SATA3 0/1/2/3 connectors, set OnChip SATA

Type to RAID. To enable RAID for the SATA3 4/5 and eSATA connectors, set OnChip SATA Type to RAID and

set OnChip SATA Port4/5 Type to As SATA Type(Figure1).

Figure 1

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 95 96

No comments

Gigabyte GA-F2A78M-D3H (rev. 3.0) User Manual Page 56