Gigabyte GA-F2A78M-D3H (rev. 3.0) User Manual download pdf (Page 58)

ConguringSATAHardDrive(s) - 58 -

Figure 5

Creating a RAID Array

TocreateaRAID array,refertothe followingexamplestoenter thecommandsand press<Enter>.When

succeeded, the message which says "created sucessfully" will appear.

fs0:\>rcadm -C -r0 -d 0 1 -s 40000

created successfully

fs0:\>

Checking Disk Information

Toseetheharddriveinformation,enterthefollowingcommandsandpress<Enter>.YouwillseeCONTROLLER

LIST and DISK LIST displayed on the screen.

rcadm -M -qa(Figure4)

fs0:\> rcadm -M -qa

After you create the array, you can enter the "rcadm -M -qa" commands to see the array information. In addition

totheCONTROLLERLISTandDISKLISTinformation,youwillseeARRAYLISTinformationdisplayedonthe

screen, too.

Example2:CreateaRAID5arraywithDrive1~4andthearraysizeis75GB.

rcadm -C -r5 -d 1 2 3 4 -s 75000 (Figure6)

("C"=Createaarray,"r5"=RAID5,d1234=Drive1~4,"s75000"=Sizeof75GB)

fs0:\>rcadm -C -r5 -d 1 2 3 4 -s 75000

created successfully

fs0:\>

Figure 6

Figure 4

Example1:CreateaRAID0arraywithDrive0andDrive1andthearraysizeis40GB.

rcadm -C -r0 -d 0 1 -s 40000 (Figure5)

("C"=Createaarray,"r0"=RAID0,d01=Drive0andDrive1,"s40000"=Sizeof40GB;tousethemaximum

sizeallowed,donotenter"s x0000")

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 95 96

No comments

Gigabyte GA-F2A78M-D3H (rev. 3.0) User Manual Page 58