GA-H81M-S2PHUser's ManualRev. 100112ME-H81MS2H-1001R
- 10 -1-5 Installing an Expansion CardRead the following guidelines before you begin to install an expansion card: • Make sure the motherboard suppor
- 11 -1-7 Internal ConnectorsUSB 2.0/1.1 PortThe USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard
- 12 -1/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply e
- 13 -6) SATA3 0/1 (SATA 6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s st
- 14 -8) F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, and system status indicator on the chassis to this header acc
- 15 -11) F_USB1/2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional
- 16 -Chapter 2 BIOS SetupFunction KeysDiffering from traditional UEFI interface, the Dashboard Mode provides a fancy and user-friendly BIOS environm
- 17 -2-2 M.I.T.Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations
- 18 - & Uncore Ratio Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used. & Uncore Frequency Di
- 19 - ` Advanced Memory Settings & ExtremeMemoryProle(X.M.P.)(Note), System Memory Multiplier, Memory Frequency(MHz) The settings above are
MotherboardGA-H81M-S2PHAug. 2, 2013Aug. 2, 2013MotherboardGA-H81M-S2PHCopyright© 2013 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademark
- 20 - ` PC Health Status & Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabl
- 21 -2-3 System InformationThis section provides information on your motherboard model and BIOS version. You can also select the default language us
- 22 -2-4 BIOS Features & Boot Option Priorities Species the overall boot order from the available devices. For example, you can set hard drive
- 23 - & VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only. EFI Driver Ena
- 24 - & Administrator Password Allows you to congure an administrator password. Press <Enter> on this item, type the password, and then p
- 25 - & Initial Display Output Species the rst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics ca
- 26 - & Audio Controller Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card i
- 27 - & Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) & Device Mode This item is congurable only when Pa
- 28 - & AC BACK Determines the state of the system after the return of power from an AC power loss. Memory The system returns to its last k
- 29 - & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup progr
- 3 -Table of ContentsGA-H81M-S2PH Motherboard Layout ... 4GA-H81M-S2PH Moth
- 30 -Regulatory StatementsRegulatory NoticesThis document must not be copied without our written permission, and the contents there of must not be im
- 31 -
- 32 -Contact UsGIGA-BYTE TECHNOLOGY CO., LTD.Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New Taipei City 231,TaiwanTEL: +886-2-8912-4000, FAX: +
- 4 -GA-H81M-S2PH Motherboard LayoutThe box contents above are for reference only and the actual items shall depend on the product package you obtain.
- 5 -GA-H81M-S2PH Motherboard Block DiagramPS/2 KB/MouseLGA1150CPUIntel® H81PCIe CLK(100 MHz)CPU CLK+/- (100 MHz)1 PCI Express x16Dual BIOSLPT6 USB 2.
- 6 -Chapter 1 Hardware Installation1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which
- 7 -1-2 ProductSpecicationsCPU Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® pro
- 8 -Internal Connectors 2 x USB 2.0/1.1 header 1 x serial port header 1 x Clear CMOS jumperBack Panel Connectors 1 x PS/2 keyboard port 1 x
- 9 -1-3 Installing the CPURead the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU.(Go t
Comments to this Manuals