Gigabyte GA-M750SLI-DS4 Datasheet Page 46

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 45
GA-M750SLI-D4 Motherboard - 46 -
Password Check
Specifies whether a password is required every time the system boots, or only when you enter
BIOS Setup. After configuring this item, set the password(s) under the Set Supervisor/User
Password item in the BIOS Main Menu.
Setup A password is only required for entering the BIOS Setup program. (Default)
System A password is required for booting the system and for entering the BIOS Setup
program.
HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your
hard drive. This feature allows your system to report read/write errors of the hard drive and to
issue warnings when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode
allows the system to silently perform unattended tasks while in a low-power mode that appears off.
(Default: Disabled)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled
displays normal POST message. (Default: Enabled)
Hybrid SLI
(Note 2)
Enables or disables the Hybrid SLI function. (Default: Disabled)
Display Detection
(Note 2)
Enabled allows the BIOS to automatically detect whether the current display is from the onboard
VGA or a PCI Express graphics card and to adjust the display setting if the monitor connection is
different from the Init Diplay First setting. (Default: Enable)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express
graphics card, or the onboard VGA.
PCI Slot Sets the PCI graphics card as the first display.
Onboard VGA Sets the onboard VGA as the first display. (Default)
PEG Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display.
PEG (Slot2) Sets the PCI Express graphics card on the PCIEX8_1 slot as the first display.
iGPU Frame Buffer Control
Determines whether to manually set the Frame Buffer Size. Auto lets BIOS automatically set the
Frame Buffer Size as required. Manual allows the Frame Buffer Size item below to be configurable.
(Default: Auto)
Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. This item is configurable
only if the iGPU Frame Buffer Control option is set to Manual. Options are: 128M (default),
256M, 512M, Disabled.
(Note 2) This item appears only if you install a graphics card that supports this feature.
Page view 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 103 104

Comments to this Manuals

No comments