Gigabyte GA-P55-UD4P User Manual download pdf (Page 26)

Hardware Installation - 26 -

9) SATA2_0/1/2/3/4/5 (SATA 3Gb/s Connectors, Controlled by P55 Chipset, Blue)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s

standard. Each SATA connector supports a single SATA device. The P55 Chipset supports RAID 0,

RAID1,RAID5,andRAID10.RefertoChapter5,"ConguringSATAHardDrive(s),"forinstructionson

conguringaRAIDarray.

7 1

PinNo. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

SATA2_0SATA2_2SATA2_4

GSATA2_0

SATA2_1SATA2_3SATA2_5

GSATA2_1

10) GSATA2_0/1 (SATA 3Gb/s Connectors, Controlled by GIGABYTE SATA2, White)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard.

Each SATA connector supports a single SATA device. The GIGABYTE SATA2 controller supports RAID 0,

RAID1,andJBOD.RefertoChapter5,"ConguringSATAHardDrive(s),"forinstructionsonconguring

a RAID array.

PinNo. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

• ARAID0orRAID 1 conguration requiresatleast two hard drives. Ifmore than two hard

drives are to be used, the total number of hard drives must be an even number.

• ARAID5 congurationrequiresatleastthreeharddrives.(Thetotal numberofharddrives

does not have to be an even number.)

• ARAID10congurationrequiresatleastfourharddrivesandthetotalnumberofharddrives

must be an even number.

Please connect the L-shaped end of

the SATA 3Gb/s cable to your SATA

hard drive.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 127 128

No comments

Gigabyte GA-P55-UD4P User Manual Page 26