Gigabyte GA-P55-UD4P User Manual download pdf (Page 89)

- 89 - Appendix

Step 5:

Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin creat-

ingtheRAIDarray.Whenpromptedtoconrmwhethertocreatethisvolume,press<Y>toconrmor<N>to

cancel (Figure 6).

When completed, you can see detailed information about the RAID array in the DISK/VOLUME INFORMA-

TION section, including the RAID level, stripe block size, array name, and array capacity, etc. (Figure 7)

To exit the RAID BIOS utility, press <Esc> or select 5. Exit in MAIN MENU.

Now, you can proceed to create the SATA RAID/AHCI driver diskette and install the SATA RAID/AHCI

driver and operating system.

Figure 6

Figure 7

Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5

PressENTERtocreatethespeciedvolume.

[

]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

[ HELP ]

Name : Volume0

RAID Level : RAID0(Stripe)

Disks : Select Disks

Strip Size : 128 MB

Capacity : 111.7 GB

Sync : N/A

Create Volume

[ CREATE VOLUME MENU ]

WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N) :

Intel(R) Matrix Storage Manager option ROM v8.9.0.1023 PCH-D wRAID5

3. Reset Disks to Non-RAID

4. Recovery Volume Options

RAID Volumes :

ID Name Level Strip Size Status Bootable

0 Volume0 RAID0(Stripe) 128KB 223.6GB Normal Yes

Physical Disks :

Port Drive Model Serial # Size Type/Status(Vol ID)

0 ST3120026AS 3JT354CP 111.7GB Member Disk(0)

1 ST3120026AS 3JT329JX 111.7GB Member Disk(0)

[

]-Select [ESC]-Exit [ENTER]-Select Menu

[ DISK/VOLUME INFORMATION ]

[ MAIN MENU ]

1. Create RAID Volume

2. Delete RAID Volume

5. Exit

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 127 128

Comments to this Manuals

No comments

Gigabyte GA-P55-UD4P User Manual Page 89

Comments to this Manuals

Related products and manuals for Motherboards Gigabyte GA-P55-UD4P