Gigabyte GA-D510UD Datasheet download pdf (Page 67)

- 67 - Appendix

5-1-3 Installing the SATA RAID/AHCI Driver and Operating System

With the SATA RAID/AHCI driver diskette and correct BIOS settings, you are ready to install Windows Vista/

XP onto your hard drive(s). The followings are examples of Windows XP and Vista installation.

A. Installing Windows XP

Step 1:

Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the mes-

sage "Press F6 if you need to install a 3rd party SCSI or RAID driver" (Figure 1). A screen will then appear

asking you to specify additional device.

Windows Setup

Press F6 if you need to install a third party SCSI or RAID driver.

Figure 1

Step 2:

InserttheoppydiskcontainingtheSATARAID/AHCIdriverandpress<S>.Thenacontrollermenusimilar

to Figure 2 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and press

<Enter>.

Step 3:

On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-

ceed with the Windows XP installation.

Figure 2

Windows Setup

  YouhavechosentocongureaSCSIAdapterforusewithWindows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

ENTER=Select F3=Exit

RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32)

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 87 88

No comments

Gigabyte GA-D510UD Datasheet Page 67