Gigabyte GA-D510UD Datasheet download pdf (Page 32)

BIOS Setup - 32 -

CPU Multi-Threading

Allows you to determine whether to enable all CPU cores and multi-threading function when using an

Intel CPU that supports multi-core technology. This feature only works for operating systems that support

multi-processor mode.

Enabled Enables all CPU cores and multi-threading capability. (Default)

Disabled Enables only one CPU core.

Limit CPUID Max. to 3

Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows

XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.0.

(Default: Disabled)

Delay For HDD (Secs)

Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The ad-

justable range is from 0 to 15 seconds. (Default: 0)

Backup BIOS Image to HDD

 AllowsthesystemtocopytheBIOSimageletotheharddrive.IfthesystemBIOSiscorrupted,itwill

berecoveredfromthisimagele.(Default:Disabled)

Init Display First

 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIgraphicscard.

PCI   SetsthePCIgraphicscardastherstdisplay.(Default)

Onboard  Setstheonboardgraphicsastherstdisplay.

On-Chip Frame Buffer Size

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-

troller. MS-DOS, for example, will use only this memory for display. Options are:8MB+1 for GTT (default),

1MB+1 for GTT.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

No comments

Gigabyte GA-D510UD Datasheet Page 32